The Cel-Fi Range
Cel-Fi Quatra 4000
Cel-Fi Quatra 4000
Cel-Fi Quatra 4000
Multi network, and scalable up to 12 coverage units, the Quatra 4000 can cover nearly 24,000 square metres!
Cel-Fi Quatra 1000
Cel-Fi Quatra 4000
Cel-Fi Quatra 4000
For single network boosting, and with up to four coverage units, the Quatra 1000 is ideal for boosting your corporate network in medium sized buildings up to 5000 square metres.
Cel-Fi Go G41
Cel-Fi Quatra 4000
Cel-Fi Go G41
For smaller premises, the single network G41 is a low cost and easily installed for boosting a single network. Need more networks? We can put several G41s next to each other and use the same antennas!
Why Cel-Fi?
What makes Cel-Fi the right solution to poor signal?
Fully OFCOM Compliant
Cel-Fi, made by Nextivity, has been designed to be "unconditionally network safe" which means it won't harm the operators network and it won't interfere with any other equipment, such as WiFi and Bluetooth. Strict OFCOM regulations govern the use of mobile signal boosters, and Cel-Fi complies fully making it one of the only license exempt products on the market. Those cheap ones on Amazon? Probably not...
Secure from the outset
Cel-Fi doesn't intercept any of the mobile traffic, and it doesn't send it over the internet either. It simply grabs the signal from outside and rebroadcasts it inside, maintinaing the same levels of security for the users as they would have if they were stood out in the street.
Seamless Handover
Unlike WiFi calling, the handover between Cel-Fi and the outside network is seamless, that means users can enter and exit your building without dropping the call. In fact, they won't even notice that they're using a boosted signal! The five bars in the top corner of their screen might be a giveaway though.
Operator Independent
Select which mobile networks and technologies you want to boost, and change them if required. You're not tied to a service provider, if you change corporate networks the settings in Cel-Fi can be changed to match. Some external antenna repositioning may be required, but a Cel-Fi trained engineer from Litenet will carry that out and ensure everything is working optimally.
A tried and tested product
Cel-Fi has been available in the USA and overseas since 2006, their products have been developed to keep up with emerging technologies throughout this time. Nextivity, the makers of Cel-Fi, know a thing or two about boosting mobile signal and as soon as the OFCOM regulations allowed, they were in like a shot. Their reliability, scalability and quick installation make them the obvious choice for eliminating mobile dead spots in any building.
There's a solution for everyone!
Single network, multi network, small building or a full campus! There's a Cel-Fi solution for you. Litenet engineers are Cel-Fi accredited installers, we've worked with some huge brands, household names and prestige premises all over the UK. You can be assured that Litenet will design and install a Cel-Fi solution that will end that poor signal frustration almost overnight!
Cel-Fi QUatra 4000
Multi-Network mobile signal boosting for bigger buildings!
The Quatra 4000 is the biggest device in the Cel-Fi range. With four inputs, and 8 receivers, it can boost all of the mobile operator networks if needed. Or boost several bands of a single operator.
Each input can be assigned to an operator, and different bands or capabilities boosted for that input. For example, we can bring a Vodafone signal into one input and boost the 3G and 4G signal, or two different bands of 4G signal (see our blog posts for an explanation of how different bands have different capabilities).
When it comes to redistributing the signal, the Cel-Fi Quatra 4000 has six on-board Coverage Unit ports, which can be expanded up to 12 with the additional Fibre Hub. Coverage Units broadcast the boosted signals inside your building, in a similar way to how WiFi works. The Coverage Units are connected back to the Network Unit (the main brain) via ethernet cables (minimum CAT5e), which may already be in place within your building.
Power to the Cel-Fi Coverage Units is delivered over this same cabling using PoE from the Network Unit, which makes installation a lot simpler, neater and more efficient. Perfect for those with strong sustainability ethics.
Diverse and Flexible
There are many ways to deploy the Quatra 4000, like the example above. Fibre extenders, or a Fibre Hub, can provide connectivity to coverage units over long distances, and standard CAT5e cable can power a Coverage Unit over 100m with NO loss of signal.
Strong and Reliable
Solidly built, and reliable, the Cel-Fi Quatra 4000 is the ideal solution for large, or complicated, enterprise environments where more than one network needs to be distributed. Powerful mobile signal, delivered exactly where you need it.
Cel-Fi QUatra Evo
Dual-Network mobile signal boosting for bigger buildings!
Replacing the now discontinued Quatra 1000, the all new Evo uses the same technology as the bigger Quatra 4000 and can boost up to two networks!
Each input can be assigned to an operator, and different bands or capabilities boosted for that input. For example, we can bring a Vodafone signal into one input and boost the 3G and 4G signal, or two different bands of 4G signal (see our blog posts for an explanation of how different bands have different capabilities).
When it comes to redistributing the signal, the Cel-Fi Evo has six on-board Coverage Unit ports, which can be expanded up to 12 with the additional Fibre Hub. Coverage Units broadcast the boosted signals inside your building, in a similar way to how WiFi works. The Coverage Units are connected back to the Network Unit (the main brain) via ethernet cables (minimum CAT5e), which may already be in place within your building.
Power to the Cel-Fi Coverage Units is delivered over this same cabling using PoE from the Network Unit, which makes installation a lot simpler, neater and more efficient. Perfect for those with strong sustainability ethics.
Diverse and Flexible
There are many ways to deploy the Quatra Evo, like the example above. Fibre extenders, or a Fibre Hub, can provide connectivity to coverage units over long distances, and standard CAT5e cable can power a Coverage Unit over 100m with NO loss of signal.
Strong and Reliable
Solidly built, and reliable, the Cel-Fi Quatra Evo is the ideal solution for large, or complicated, enterprise environments where more than one network needs to be distributed. Powerful mobile signal, delivered exactly where you need it.
Cel-Fi Go G41
Compact, yet powerful, single network booster!
The Cel-Fi Go G41 is perfect for smaller office spaces, warehouses or underground areas. The G41 packs a punch, with 1500 square metres of coverage!
The G41's robust construction and small form mean it can be discretely installed almost anywhere. Both external and internal antennas are fed via co-axial cable, with the possibility of multiple internal antennas to increase coverage footprint.
The Cel-Fi G41 can deliver high quality mobile signal, right where you need it most.
More than one network?
If you need more than one network, it's possible to install several G41s in parallel, reducing the installation requirements considerably, and allowing multiple mobile operators to be rebroadcast over a single cable.
Easy Installation
The G41 is easy to install, and can be sold by Litenet as a package for self installation, with everything required to get your signal boosted.
Ideal for a small office, we will supply a G41, donor antenna, server antenna and length of cable for you to install. Once live a Litenet engineer will log in remotely and ensure you're achieving the best results possible.
Alternatively, Litenet can install it for you. Our professional cabling engineers have decades of experience in some challenging (and fascinating!) environments, including car dealerships, Formula One factories, Cathedrals and even bog standard office spaces.